
Energy Storage
Project-configured battery systems for commercial, industrial, residential, and containerized storage applications.
Compare this family →Response target: within 12 hours for project inquiries
Product center
Compare liquid-cooled cabinets, containerized BESS, residential storage modules, and standby battery series by power, energy, architecture, and application.
Browse by family
Each category connects a buyer requirement to products with published technical data and a clear route to configuration support.

Project-configured battery systems for commercial, industrial, residential, and containerized storage applications.
Compare this family →
Battery cabinets and integrated systems for site energy management, renewable integration, and resilience planning.
Compare this family →
Rack-mounted, stacked, and wall-mounted battery formats for residential solar and backup system design.
Compare this family →
Integrated high-energy storage formats for larger renewable, microgrid, and site-level projects.
Compare this family →
LiFePO4 battery families for photovoltaic storage and off-grid system integration.
Compare this family →
VRLA AGM and gel battery families for solar, standby, and controlled-cycle applications.
Compare this family →
12V VRLA AGM battery models for standby, UPS, and backup power banks.
Compare this family →
Coordinated photovoltaic, battery, inverter, and control solutions for hybrid power projects.
Compare this family →Product range
Use the key ratings below to shortlist a platform, then confirm usable energy, interfaces, operating conditions, and delivery scope for the project.

A family of cabinet and integrated battery energy storage formats for measured commercial and industrial project requirements.

An outdoor LFP battery energy storage cabinet with a 100 kW power rating and 215 kWh nominal energy rating.

A liquid-cooled outdoor battery cabinet with 418 kWh nominal energy, 1331.2 V nominal DC voltage, and 314 Ah cell capacity.

An outdoor air-cooled lithium battery storage system with 20 kW power and 107.52 kWh nominal energy ratings.

A 500 kW / 1075.2 kWh containerized system configuration with a stated two-hour duration and IP54 enclosure rating.

A 51.2 V, 100 Ah rack-mounted LFP battery with 5.12 kWh nominal energy for compatible residential, solar, and small-site storage architectures.

A three-module high-voltage stacked LFP home battery system with 15.36 kWh nominal energy, 153.6 V nominal system voltage, and IP54 enclosure rating.

A 51.2 V, 100 Ah wall-mounted LFP battery with 5.12 kWh nominal energy for compatible residential solar and backup architectures.

A modular stacked home-storage format built around 51.2 V, 100 Ah, 5.12 kWh battery modules.

A 51.2 V wall-mounted battery series with nominal energy options of 5.12, 10.24, and 15.36 kWh.

A single-phase residential solar-storage system with 6 kW rated output, 16.076 kWh nominal battery energy, and up to 9 kW of published PV input.

A single-phase residential and small-site solar-storage system with 12 kW rated output, 32.153 kWh nominal battery energy, and up to 18 kW of published PV input.

Six 12 V VRLA AGM models spanning 7 Ah to 250 Ah, with capacity-rate, mass, and conditional design float-life data.

A 5,016 kWh liquid-cooled DC-side battery platform for utility-scale renewable, grid-support, and large microgrid projects.

An all-in-one outdoor liquid-cooled system rated at 125 kW / 261 kWh for commercial, industrial, charging, and low-voltage distribution applications.

A high-density liquid-cooled commercial and industrial energy storage system with 522 kWh nominal energy and 125 kW or 250 kW power options.
Use the selector for a transparent rules-based shortlist, then send the load, application, site, and schedule for technical review.