Utility and renewable energy storage
Validate the duty cycle, site, interfaces, and operating objective before confirming model suitability.
energy storage
WEIDA SICE ONE@5016L DC Battery Storage Container
A 5,016 kWh liquid-cooled DC battery container with twelve 418 kWh clusters, a nominal voltage of 1,331.2 V and an IP55 container enclosure.
- Model
- SICE ONE@5016L
- Nominal battery energy
- 5,016 kWh DC
- Battery arrangement
- 12 × 418 kWh clusters
- Nominal / operating voltage
- 1,331.2 V / 1,164.8–1,497.6 V DC
Product overview
SICE ONE@5016L supplies the battery side of a larger energy storage project. Define the PCS power, grid voltage, EMS interface and AC equipment separately from the container's DC energy rating and physical footprint.
Configuration note: nameplate values help define the starting point. Final usable energy, interfaces, operating limits, document scope, and commercial terms are confirmed for the specific project.
Key specifications
| Parameter | Value | Condition or note |
|---|---|---|
| Model | SICE ONE@5016L | — |
| Nominal battery energy | 5,016 kWh DC | — |
| Battery arrangement | 12 × 418 kWh clusters | — |
| Nominal / operating voltage | 1,331.2 V / 1,164.8–1,497.6 V DC | — |
| Charge / discharge rate | Up to 0.5P | Quoted PCS rating and battery operating limits determine delivered AC power. |
| Thermal management | Liquid cooling | — |
| Enclosure protection | IP55 container / IP66 battery PACK | — |
| Dimensions (L × W × H) | 6,058 × 2,550 × 2,896 mm | — |
| Mass | 48 tonnes | — |
| Communications | RS485 / CAN | — |
Applications to evaluate
Large commercial and industrial battery projects
Validate the duty cycle, site, interfaces, and operating objective before confirming model suitability.
Selection, supply scope and engineering notes
- Provide the PCS power, AC voltage, target duration and plant control requirements.
- Check transport width, lifting plan, foundations and service clearances against the quoted drawings.
- State whether the quotation includes PCS, transformer, switchgear, EMS, fire-system interfaces, installation and commissioning.
Confirm the project responsibility matrix
The product rating does not define a turnkey project scope. The quotation should identify who supplies, integrates, installs, commissions, and accepts each applicable item.
- Battery system, BMS, thermal management, enclosure, internal protection, and communications
- PCS, EMS or SCADA, transformer, switchgear, metering, external protection, and grid interface
- Fire strategy, foundations, lifting, cable routing, installation, testing, and commissioning
- Documentation, training, spare parts, warranty conditions, maintenance, and acceptance records
Technical documents
Use the public page and any available procurement brief for initial comparison. Request the applicable controlled data sheet, drawings, test or certificate evidence, and commercial documents for the exact quoted model and destination.
Guides for your technical review
C&I BESS Sizing Guide
A defensible C&I battery energy storage system size comes from interval load data, a ranked operating objective, power constraints and usable energy at a stated measurement point. Start with the duty the site needs, then evaluate the cabinet or container configuration against it.
Read guide →DC Container vs AC BESS
A battery container's MWh rating does not define a complete grid-connected AC energy storage system. Separate the DC battery boundary from PCS, transformer, switchgear, controls, civil works, installation, commissioning, and acceptance before comparing proposals.
Read guide →Frequently asked questions
What buyers ask before specifying a battery system
Answers cover the information needed to confirm configuration, operating conditions, documentation, price, and delivery.
Why are prices not published on the product pages?
The listed products are project-configured B2B systems or battery series. Pricing depends on configuration, quantity, accessories, packaging, destination, and commercial terms, so quotations are prepared against a defined project scope.
What is the production and delivery lead time?
Lead time is confirmed only after the configuration, quantity, compliance documents, packaging, and destination are known.
Discuss the SICE ONE@5016L
Technical questions and quotation enquiries for this model.